The police scanner first made an appearance in the 1930s. Back then, the police would broadcast through any local AM radio station so anyone with a radio could hear the calls. Why is that? That is because a traditional radio system is full of frequencies, or channels of communication.
But with the coming of the police scanner, the local frequencies were no longer used. Therefore, in order to hear transmissions, you must program certain channels into the scanner. The first types of police scanners were crystal controlled with only about three-four channels. To listen in, it was necessary to have a quartz crystal tuned to that frequency and plugged into an internal slot. However, these quartz crystals became too expensive to keep up, and a change was obviously required.
What happened next? To find out, take a tour of paranoiascanner.com. Find articles about police scanners, news about police scanners, and resources and recommended reading about police scanners, all on one portal. For instance, did you know that in the late 1970’s, programmable police scanners were invented? These scanners had keypads that helped you enter frequencies that the scanner’s memory would save. Then followed the trunk radio system, which could keep track of five to 30 frequencies assigned by a site controller. So the emergency department would have one frequency and the fire service another.
All this and more is available to you at paranoiascanner.com. From those 1930s scanners to the digital scanners today, the journey has been eventful. Modern digital police scanners are great to use because you can say things over the radio and only those who can decode it can hear it, which means just a few people who have programmed to that channel.
So whether you want a police scanner to provide news or leisure (hours of talking with friends and strangers), ask us for advise before you buy. As you will see, we know what we are talking about!
|
